8x8 Community

My Services Express Jitsi as a Service 8x8 Connect 8x8 Work for Web

Configure a Valcom V-2001A with V-9964 Feedback Eliminator for 8x8 Services

Updated: 09/10/2024

Objective

Configuring a Valcom V-2001A with a Feedback Eliminator Valcom V-9964 for 8x8 services still needs a Universal Telephone Interface (UTI) like Valcom V-9970 for it to work. To configure only Valcom V-2001A without the Feedback Eliminator, see Configure a Valcom V-2001A Overhead Paging System for 8x8 Services.
Disclaimer: 8x8 is not Responsible for configuration or deployment of legacy 3rd party Paging devices, please consult the Original Equipment Manufacturer for support. 8x8 X Series does not support FXO 3rd party devices.

Applies To

  • Valcom V-2001A (Single Zone Page Control Unit)
  • Valcom V-9964 (Digital Feedback Eliminator / Message Stacker)
  • Valcom V-9970 (Universal Telephone Interface)

Procedure

Valcom V-9964 won't work on either FXS or FXO Mode, so a Universal Telephone Interface (UTI) like Valcom V-9970 must be used.
  1. Setup: 8x8 Adapter > V-9970 > V-9964 > V-2001A.
  2. To connect altogether Valcom V-9970, V-9964, and V-2001A, see diagram below.