Objective
Enable Wi-Fi on Poly Edge E series devices.
Applies To
- Poly Edge E Series
Procedure
To enable Wi-Fi:
- Go to one of the following depending on your firmware revision
- Menu > Wifi.
- Menu > Settings > Basic > Wi-Fi Menu.
- Press the Select key to enable Wi-Fi.
- Press Save.
- Press Reboot.
To connect to Wi-Fi:
- Do one of the following:
- Press the Scan softkey to scan for available networks and select the desired network to enter information as required by the networks security settings
- Press the Other softkey to manually enter network settings, including SSID, Security type, and password.
- Select Connect.