Objective
Find the administrator password for a device in Admin Console.
Applies To
- Device Passwords
- Admin Console
Procedure
MAC Passwords (Device Admin Password)
If your phone or adapter has already been activated for service with 8x8 and/or is running on UC4.0 firmware or later (Poly), you will not be able to use the manufacturer’s default password to access the administrator settings of your phone. Instead, in Admin Console, 8x8 system administrators can go to Devices > View Device Report and view the Device Admin Password.
Default Passwords
If your phone or adapter has not yet been activated for service (or has been factory reset and not re-activated) and is also running on firmware earlier than UC4.0 (Poly), you should be able to use the manufacturer’s default admin password.
Cisco Phones
- 198y9w9y891
- 654123
Cisco SPA 2102 Adapter
- 8kappX!g
Cisco SPA 122 Adapter
- admin (if device is factory reset)
- 654123 (if device is pointed to 8x8 configuration, but not yet activated)
- MAC Password (if device is already activated and working)
Panasonic Phones
- adminpass
Poly IP Phones on non-UC4.0+ Firmware
- 456
- MAC Password
Wireless Poly KIRK/Spectralink Phones
- kws300default phone passwords
Spectralink Base
- ip600
Yealink Phones
- admin