Enable Wi-Fi on Yealink W Series Phones

Updated: 03/25/2024

Objective

Enable Wi-Fi on Yealink W series phones.

Applies To

  • Yealink T53W
  • Yealink T54W
  • Yealink T57W
  • Yealink T58W

Procedure

For Non Touch Screen models (T53W,T54W)

  1. Press Menu.
  2. Select Settings and press Enter.
  3. Select Basic Settings and press Enter.
  4. Scroll to Wi-Fi and press Enter.
  5. Select Wi-Fi (toggle ON) and press Save.
  6. Phone will scan available networks.
  7. Scroll to Available networks and press Enter.
  8. Select your Wi-Fi network and press Connect.
  9. Select Password and type in Wi-Fi password (‘abc’ softkey will change between numbers and letters).  Press Connect.
  10. Selected network will now appear with a checkmark in the list of ‘Available Networks’ showing that the connection was successful.
  11. Press Back 4 times then Exit to return to main screen.

Touch Screen (T57W)

  1. Select Menu > Basic > Wi-Fi and select the On radio button.
  2. Scroll to Available Networks.
  3. Select your Wi-Fi network and use virtual keyboard to enter password.
  4. Collapse virtual keyboard.
  5. Select Ok.
  6. Selected network will now appear with a 'Connect Successfully!' message in the list of Available Networks.
  7. Press Home to return to the main screen.

Touch Screen (T58W)

  1. Select MenuBasic Settings > Wi-Fi.
  2. Toggle Wi-Fi slider to activated position.
  3. Select Wi-Fi network from populated list.
  4. Enter Wi-Fi password and Connect.
  5. Selected network will now appear with a Connected message in the list of networks.
  6. Press Home to return to the main screen.

Additional Information

WF50 Wi-Fi USB Dongle for T53
  • Follow setup instructions for Non Touch Screen (T53W,T54) above once dongle is installed.
WF40 Wi-Fi USB Dongle for T4xU Series
  • For T43U and T46U follow setup instructions for Non Touch Screen (T53W,T54) above once the dongle is installed.
  • For T48U follow setup instructions for Touch Screen (T57W) above once the dongle is installed.