Bogen UTI1 Overhead Paging System Configuration for 8x8 Services

Updated: 05/14/2024

Objective

Configuring a Bogen UTI1 overhead paging system for 8x8 services.

Applies To

  • Bogen UTI1 Overhead Paging System

Procedure

Always refer to the original device manual or work done by a factory trained and certified installer.
  1. Using the phone line or RJ11 cable, connect your 8x8 adapter to the Station Port.
  2. On the Trunk/Page Port/Station switch, ensure that Station is selected.
Bogen_UTI1_Config.png