Enable and Connect to Wi-Fi on Poly Edge E Series Devices

Updated: 03/25/2024

Objective

Enable Wi-Fi on Poly Edge E series devices.

Applies To

  • Poly Edge E Series

Procedure

To enable Wi-Fi:
  1. Go to one of the following depending on your firmware revision
    • Menu > Wifi.
    • Menu > Settings > Basic > Wi-Fi Menu.
  2. Press the Select key to enable Wi-Fi.
  3. Press Save.
  4. Press Reboot.
To connect to Wi-Fi:
  1. Do one of the following:
    • Press the Scan softkey to scan for available networks and select the desired network to enter information as required by the networks security settings
    • Press the Other softkey to manually enter network settings, including SSID, Security type, and password.
  2. Select Connect.
1.JPG
2.JPG