Valcom V-9970 Overhead Paging System Configuration for 8x8 Services

Updated: 07/12/2024

Objective

Configuring a Valcom V-9970 overhead paging system for 8x8 services.

Applies To

  • Valcom V-9970 Overhead Paging System

Procedure

Disclaimer: 8x8 is not Responsible for configuration or deployment of legacy 3rd party Paging devices. Consult the Original Equipment Manufacturer for support. 8x8 X Series does not support FXO 3rd party devices.
  1. Ensure that DIP Switches 1 and 2 are turned ON.
  2. Using the phone line or RJ11 cable, connect your 8x8 adapter to the J2 Port of the Valcom V-9970.
  3. Connect the speaker to the Pins labeled Page Out.