Access the Web GUI for Cisco 8800 Series Phone

Updated: 04/10/2024

Objective

Access the web GUI of a Cisco 8800 Series phone to perform certain tasks.

Applies To

  • Cisco 8800 Series Phone

Procedure

  1. On the front of the phone, press the Cog button to access the settings.
  2. Go to Network Configuration.
  3. Go to IPv4 address settings.
  4. Change the Connection Type so you can see Static IP.
  5. Take note of the Static IP address (this is what will be used to access the web GUI).
  6. On a PC/Laptop connected to the same network as the phones open up a web page and enter the following https://[IP address] in the URL bar at the top.
  7. Once you have access to the web GUI enter the login details making sure you log in as "Admin". Note: Password can be found in devices list in Admin Console.