To factory reset your Panasonic KX-TGP600 Dect Phone, enter the MAC password or MAC ID and complete the reset process on your device. Learn more here.
If your Panasonic KX-TGP600 DECT phone is receiving Error 003: Not Registered, it may be due to a bad configuration. Read here for more information.
You can pair Panasonic KX-TPA60 or KX-UDT131 handsets by confirming the display of the right Register Unit. Learn the step-by-process here.
You must hold down the Wi-Fi button on the base unit's side until the LED light blinks red to pair or unpair your Panasonic DECT Phone. Learn more here.
To access the web interface of the Panasonic DECT wireless IP phone, Embedded Web must be turned on. Click here for full steps to access web GUI.
You change the display name on your Panasonic KX-TPA60 device through the Menu option in your phone settings. Learn the step-by-step process here.
To pair a Panasonic KX-A406 to a Panasonic KX-TGP600 base unit, enable the Repeater Mode in the registered handset. Learn more here.
To unpair a Panasonic handset to pair with a new base, first, confirm the handset is displaying 'No Service'. Learn the step-by-step process here.
Error 001: No IP Assignment on your Panasonic KX-TGP600 DECT phone might result from a bad cable, bad port or a DHCP issue. Learn how to resolve the error here.
You will first need to pair the replacement handset to the base in order to enable Embedded Web for Web Administration Interface access. Learn more here.