8x8 Community

My Services Express Jitsi as a Service 8x8 Connect 8x8 Work for Web

Valcom V-2000A Overhead Paging System Configuration for 8x8 Services

Updated: 01/08/2025

Objective

Configuring a Valcom V-2000A overhead paging system for 8x8 services.
Disclaimer:  8x8 is not Responsible for configuration or deployment of legacy 3rd party Paging devices, please consult the Original Equipment Manufacturer for support.  8x8 X Series does not support FXO 3rd party devices.

Applies To

  • Valcom V-2000A Overhead Paging System (FXS Mode Only)

Procedure

  1. Ensure that the Battery Feed is on. In the on position this sets this as Station and or Loop Start Trunk (FXS Mode).
  2. Connect your 8x8 adapter to the the Tip and Ring as shown on the image below.
Valcom_2000A_Overhead_Paging.png