To configure Viking PA-2A overhead paging system, turn on DIP switch 4 and connect the phone line to 8x8 adapter. Learn more.
To configure a Viking PA-30 overhead paging system for 8x8 services, Turn ON DIP Switch 1 and connect the RJ11 cable to an 8x8 adapter. Learn more here.
To configure a Viking PA-15 Overhead Paging System for 8x8 services, move the FXS/FXO Switch to FXS and leave DIP switches 1-10 in default settings. Learn more.
To configure a Valcom V-9970 overhead paging system for 8x8 services, ensure that the DIP Switches 1 and 2 are turned ON. Find the full list of steps here.
You need a Universal Telephone Interface, such as a Valcom V-9970 to configure a Valcom V-2001A, with a Feedback Eliminator Valcom V-9964. Learn more here.
You need a Universal Telephone Interface like Valcom V-9970 to configure your Valcom V-2001A overhead paging system for 8x8 services. Learn more here.
To configure Valcom V-2003A, you need a Universal Telephone Interface like Valcom V-9970 for it to work. Learn more here.
To configure a Valcom V-2000A overhead paging system, ensure that Battery Feed is off. Connect 8x8 adapter to the Tip and Ring connectors. Learn more.
To configure a Valcom V-9941A overhead paging system for 8x8 services, you begin by ensuring the Switches SW1-1, SW1-2 and SW3 are OFF. Find the guide here.
Connect a Viking ZPI-4 Overhead Paging System to a Cisco SPA122 ATA by configuring Ring Trip Paging. Learn more here.
Receiving an error "the paging system is not available" when using the overhead paging system? Create a case with 8x8 Technical Support. Learn more.
One possible solution: Some legacy Paging systems (not all) adhere to older USOC analog standards, they comply with a ring voltage range value of 60 to 130 Volts. The Audiocodes only supports SINE 54 VRMS which equals 77 Volts while the Obiha supports Ring Voltage: 55v–85v.